Digiop BLK-IPS101 Einstellungsanleitung PDF herunterladen (Seite 11)

7NVR and hDVR Systems Setup Guide

SECTION 3: SYSTEM SETUP

3.1 Check LAN for default IP address compatibility

All IP devices (computers, cameras, encoders, etc.) are initially setup with factory default network settings. Some devices are preset

with xed (static) IP address, while others acquire their network settings through a DHCP server. For instance, all DIGIOP® Black IP

cameras and encoders are factory congured to acquire an IP address from a DHCP server, if one is present, or default to the factory

preset IP address 192.168.0.100. To avoid addressing conicts on networks without DHCP, perform the following steps to check the

network before connecting your camera to ensure that network conicts won’t occur. On networks with DHCP, skip to section 3.2.

1. At a Microsoft Windows computer attached to the LAN subnet where the camera will be connected (surveillance network),

open a Command Prompt window.

a. Click the Windows Start button and select Run.

b. In the Open eld, enter “cmd”, then click OK.

2. At the command prompt, use the ping command to see if the default IP address of your IP device is in use. If the default

static IP address is 192.168.0.100, enter:

ping 192.168.0.100

The “Request timed out” response indicates that the IP address is not currently in use and the camera can probably be

connected without causing conicts.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 46 47

Keine Kommentare

Digiop BLK-IPS101 Einstellungsanleitung Seite 11