Digiop BLK-IPS101 Einstellungsanleitung PDF herunterladen (Seite 44)

www.digiop.com

APPENDIX D: CONFIGURE THE DIGIOP® BLACK IP CAMERA ADDRESS

4. In the IP Setup window, click the Static option bullet to select this option.

Static

Option

If you have other compatible, network settings you want to apply to the device, enter them in the appropriate locations. Click

Setup to save settings.

5. In the Login window, enter the ID and PW (password) for your camera and click Login. The default administrator values for

the ID and PW are root and pass. After entering ID and PW, the IP Setup window closes.

6. In the IPAdmin Tool window, click Refresh and verify that the entry representing the camera now shows the new IP address.

D.4 Connect to the camera with IE

To further test the connectability of the camera (network settings) and verify video streaming:

1. Open Microsoft Internet Explorer (IE).

2. In the Internet address eld, enter the newly congured IP address for your camera in the format:

http://<IP address>/

Where <IP address> is the IP address of your camera. For example, if the new IP address of the camera is 192.168.1.201,

enter: http://192.168.1.201

3. If prompted to install an ActiveX control such as AxNVC.cab, follow screen prompts to install the software.

IE prompt to install ActiveX control

1 2 ... 39 40 41 42 43 44 45 46 47

Keine Kommentare

Digiop BLK-IPS101 Einstellungsanleitung Seite 44