Digiop BLK-IPS101 Einstellungsanleitung PDF herunterladen (Seite 30)

www.digiop.com

SECTION 3: SYSTEM SETUP

5. After selecting a sensor, you can set up a control (relay output) to activate.

6. Select a Sensor Recording Time:

— Sensor Active Duration – Camera records while the sensor is activated

— Predened Time – Allows you to record from 3 seconds to 5 minutes (xed duration) after a sensor is activated.

NOTE

For comprehensive scheduling of sensor monitoring, go to TOOLS > Congure > Schedule.

ASSOCIATING PTZ PRESETS WITH SENSORS

1. Select a sensor.

2. Select a PTZ-enabled camera to associate with this sensor.

3. Select a PTZ Preset to associate with this camera and sensor.

3.11.1 Congure recording schedule

Congure each camera and each timeslot for the preferred recording mode: Motion detection (M), Continuous recording (C), Motion

or Sensor (M,S), Continuous with Sensor (C,S), Sensor activated (S), or OFF. Ensure that recording is paused before setting up a

recording schedule. The schedule setup for one camera can be copied to other cameras.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 46 47

Keine Kommentare

Digiop BLK-IPS101 Einstellungsanleitung Seite 30