Digiop BLK-IPS101 Einstellungsanleitung PDF herunterladen (Seite 43)

39NVR and hDVR Systems Setup Guide

APPENDIX D: CONFIGURE THE DIGIOP® BLACK IP CAMERA ADDRESS

D.3 Conguring the camera network settings

NOTE

In networks with a DHCP server, the IP camera will acquire dynamic (changeable) network settings when it is initially powered

on. These dynamic settings can easily be converted to static settings, or changed to other static settings that are also compatible

with your network.

1. Connect your camera to the network, then power on the camera.

2. Open the IPAdminTool directory on your computer, then double click the le IPAdminTool.exe to start the application.

When the IPAdmin Tool starts, it will discover all the IP devices it supports that exist on the network. The discovery process

may take a few minutes.

Check the list of IP devices found by IPAdmin Tool. You can identify your camera by its MAC address. If the camera was not

found, click the Refresh button every minute until your camera appears in the list.

3. After nding the camera you are conguring, right click the entry, then select IP Address from the drop-down list. An IP

Setup window will open.

1 2 ... 38 39 40 41 42 43 44 45 46 47

Keine Kommentare

Digiop BLK-IPS101 Einstellungsanleitung Seite 43